|
|
| |
|
|
| |
High-end Layer 2 management, redundant self-healing ring and a wide-operating temperature from -40℃ to 75℃ are providing highly reliable network. The EMC noise immunity complies with IEC standards and attains a high level 3/4. The intuitive design of WEB GUI interface provides users with easy access and convenience. |
|
| |
|
|
| |
|
| |
 |
IPv6 address suitable for larger network and neighbor discovery |
|
Automatic IP assignment by DHCP/BootP server for easy network construction |
|
DHCP relay option 82 for sending DHCP requests with clients’ identities to a DHCP server |
|
Port-based DHCP server with IP and MAC binding makes IP maintenance much easier* |
|
SNMP v1/v2c/v3 facilitates the exchange of management between network devices |
|
Supports EtherNet/IP and MODBUS TCP protocols that facilitates the remote management by SCADA and other industrial devices |
|
Proprietary ONE RING and ONE CHAIN high end redundancy technologies, easy to build multiple ring topology, self-healing recovery time < 20ms. |
|
STP/RSTP/MSTP for network redundancy further ensures reliability |
|
QoS (IEEE 802.1p) and TOS/DSCP for mission-critical applications |
|
IEEE 802.1Q VLAN, MAC-based VLAN*, IP Subnet-based VLAN*, VLAN isolation* and GVRP optimize network strategy |
|
Enhanced network security with IEEE 802.1X, TACACS+, SSH, HTTPS and SNMP v3 |
|
IEEE 802.3ad port trunking in parallel to increase the link bandwidth |
|
SNTP (simple network time protocol) for network clock synchronization |
|
Broadcast/Multicast / Unknown Unicast storm control improves throughput problems |
|
Loopback-Detection to avoid broadcast loops, and shutdown the corresponding ports automatically. |
|
Cable diagnostic provides the mechanism to detect and report potential cabling issues |
|
Intelligent Access Control List(ACL) |
|
MAC addresses locking function per port blocks unauthorized access |
|
USB console interface for easy connection with laptops |
|
IGMP Snooping and GMVP prunes multicast traffic |
|
RMON groups 1,2,3,9(history, statistics, alarms and events) for enhanced flow management and analysis |
|
CPU utilization displays the amount of works the CPU handles |
|
Port mirroring for Many-to-One ports online troubleshooting |
|
Versatile system file updates by TFTP, HTTPS or HTTP |
|
DDM diagnosis function by SFP fiber module |
|
Auto warning by email, DI, relay, Syslog & SNMP trap |
|
Compatible with various industrial protocols, including EtherNet/IP, Profinet, CC-LINK IE and DNP 3.0 |
|
|
|
|
|
|
| |
|
|
| |
|
|
| |
| |
Technology |
| |
|
|
IEEE 802.3 10Base-T |
|
|
|
IEEE 802.3u 100Base-T(X) and 100Base-FX |
|
|
|
IEEE 802.3ab 1000Base-T |
|
|
|
IEEE 802.3z 1000Base-X |
|
|
|
IEEE 802.3x Flow Control |
|
|
|
IEEE 802.1D Spanning Tree Protocol |
|
|
|
IEEE 802.1w Rapid Spanning Tree Protocol |
|
|
|
IEEE 802.1p Class of Service, Priority Protocols |
|
|
|
IEEE 802.1Q VLAN Tagging |
|
|
|
IEEE 802.1X Port Authentication |
|
|
|
IEEE 802.3ad LACP Aggregation |
|
|
|
IEEE 802.1AB Link Layer Discovery Protocol |
|
|
| |
Processing Type |
| |
|
|
IEEE 802.3x Flow control in full duplex, back-pressure flow control in half duplex |
|
|
| |
Interface |
| |
|
|
RJ45 Ports: 6 10/100Base-T(X), auto MDI/MDI-X, auto negotiation |
|
|
| Gigabit Ethernet Combo Ports |
|
|
|
RJ45 Ports: 2 10/100/1000Base-T, auto MDI/MDI-X, auto negotiation |
|
|
|
SFP Ports: 2 100/1000Base-SFP |
|
|
| Console Port: USB B-Type connector |
|
|
|
Device: ALARM, PWR1, PWR2, DI1, DI2 |
|
|
|
Ports: 100/1000M(SFP port), 10/100/1000M(GbE RJ45 port), 10/100M(FE RJ45 port), LINK/ACT |
|
|
| |
Digital Inputs(DI) |
| |
|
|
2 sets |
|
|
|
0~+5V is OFF |
|
|
|
+11V~30V is ON |
|
|
|
Max. input current 6mA |
|
|
| |
Alarm Contacts(DO) |
| |
|
|
2 relay outputs |
|
|
|
Carry current 5 A@24VDC |
|
|
| |
Reset Button: |
| |
|
|
1set |
|
|
| |
Performance and Scalability |
| |
|
|
Switching Capacity: 5.2Gbps, Wired speed, Non-blocking switching fabric |
|
|
|
Forwarding Rate: 7.7Mpps |
|
|
|
MAC Address Table: 8K |
|
|
|
Packet Buffer Memory: 512K bits |
|
|
|
IGMP Multicast Groups: 256 |
|
|
|
Max. VLANs: 255 |
|
|
|
Quality of Service: 8 priority queues per port |
|
|
|
DHCP/BootP Server: 1275 IP addresses |
|
|
|
Jumbo Frame: 9,216 Bytes |
|
|
| |
Management |
| |
|
| Software: STP/RSTP/MSTP, LACP, QoS, IGMP Snooping v1/v2/v3, IGMP Query v1/v2, GARP, GMRP, VLAN, SSH, DNS, HTTP, HTTPS, RADIUS, TACACS+, SNMP v1/v2c/v3, SNMP Traps, TFTP, RMON, LLDP, BootP Server/Client, DHCP Server/Client, DHCP L2 Relay, DHCP Relay Option 82, DHCP Option 66/67, Telnet, Syslog, SMTP, SNTP Server/Client, IPv6, MODBUS TCP, EtherNet/IP |
|
|
| Security: MAC/IP/TCP/UDP filtering, HTTPS, SSH, 802.1x, TACACS+, SNMP v3 |
|
|
| Configuration: Web Browser, Cisco-like Telnet CLI, USB Local Console , SNMP, MODBUS TCP, EtherNet/IP, IEXplorer Utility |
|
|
| MIB: MIB II, Bridge MIB, SNMP MIB, Ether-like MIB, Q-Bridge/P-Bridge MIB, IF MIB, Traceroute MIB, TCP MIB, UDP MIB, IP MIB, RMON Group 1,2,3,9, Delta Private MIB |
|
|
| |
Power Requirements |
| |
|
|
Input Voltage: 2 sets, 12 to 48VDC redundant inputs by terminal block |
|
|
|
Input Current: 0.87A Max. |
|
|
|
Overload Current Protection: Present, Max. Input current 3A |
|
|
|
Reverse Polarity Protection : Present |
|
|
|
Buffer Time : Min. 12ms at 24VDC |
|
|
| |
Physical |
| |
|
|
Housing : IP40 aluminum metal case |
|
|
|
Dimensions : 145.3 mm(H) x 75 mm(W) x 108.7 mm (D) |
|
|
|
Weight : 520g |
|
|
|
Installation : Industrial DIN-Rail and wall mounting |
|
|
| |
Environmental Limits |
| |
|
|
Operating Temperature : -40℃ to 75℃(-40℉ to 167℉) |
|
|
|
Storage Temperature: -40℃ to 85℃(-40℉ to 185℉) |
|
|
|
Ambient Relative Humidity: 5% to 95%(non-condensing) |
|
|
| |
Approvals |
| |
|
| Safety: UL 508, EN 60950-1, IEC 61131-2 |
|
|
| EMI: FCC 47 CFR Part 15 Subpart B Class A, IEC 61000-6-4, EN 55022 |
|
|
| EMS(IEC 61000-6-2): IEC 61000-4-2 level 3, IEC 61000-4-3 level 3, IEC 61000-4-4 level 4, IEC 61000-4-5 level 3, IEC 61000-4-6 level 3, IEC 61000-4-8 level 4, IEC 61000-4-29 |
|
|
| Environmental Type Tests: |
|
|
|
Cold Temperature: IEC 60068-2-1 |
|
|
|
Dry Heat: IEC 60068-2-2 |
|
|
|
Humidity: IEC 60068-2-30 |
|
|
|
Shock: IEC 60255-21-2 |
|
|
|
Freefall: IEC 60068-2-32 |
|
|
|
Vibration: IEC 60068-2-6 |
|
|
|
Hi-Pot: 1.5KV |
|
|
|
|
|
|
