|
|
Features & Benefits
|
|
|
Based on IEEE 802.3at standard up to 30Watts per port. Backward compatible with IEEE 802.3af |
|
Advanced PoE management and intelligent powered device(PD) class detection |
|
IPv6 address suitable for larger network and neighbor discovery |
|
Automatic IP assignment by DHCP server for easy network construction |
|
DHCP relay option 82 for sending DHCP requests with clients’ identities to a DHCP server |
|
SNMP v1/v2c/v3 facilitates the exchange of management between network devices |
|
Proprietary Redundancy RING and Redundancy CHAIN high end redundancy technologies, easy to build multiple ring topology, self-healing recovery time < 30ms |
|
IEC 62439-2 MRP(media redundancy protocol) for IEC-based redundant ring topology |
|
STP/RSTP/MSTP for network redundancy further ensures reliability |
|
QoS(IEEE 802.1p) and TOS/DSCP for mission-critical applications |
|
IEEE 802.1Q VLAN, Q-in-Q double VLAN, VLAN isolation and GVRP optimize network strategy |
|
Enhanced network security with IEEE 802.1X, TACACS+, SSH, HTTPS and SNMP v3 |
|
IEEE 802.3ad port trunking in parallel to increase the link bandwidth |
|
IEEE 1588v2 PTP (Precision Time Protocol) for precise time synchronization of network |
|
Broadcast/Multicast / Unknown Unicast storm control improves throughput problems |
|
Loopback-Detection to avoid broadcast loops, and shutdown the corresponding ports automatically |
|
Cable diagnostic provides the mechanism to detect and report potential cabling issues Intelligent Access Control List(ACL) |
|
MAC addresses locking function per port blocks unauthorized access |
|
IGMP Snooping prunes multicast traffic |
|
Port mirroring for Many-to-One ports online troubleshooting |
|
DDM diagnosis function by SFP fiber module |
|
Auto warning by email, relay, Syslog & SNMP trap |
|
Compatible with various industrial protocols, including EtherNet/IP, Profinet, CC-LINK IE and DNP 3.0 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Technology |
|
|
|
IEEE 802.3 10Base-T |
|
|
|
IEEE 802.3u 100Base-T(X) and 100Base-FX |
|
|
|
IEEE 802.3ab 1000Base-T |
|
|
|
IEEE 802.3z 1000Base-X |
|
|
|
IEEE 802.3x Flow Control |
|
|
|
IEEE 802.1D Spanning Tree Protocol |
|
|
|
IEEE 802.1w Rapid Spanning Tree Protocol |
|
|
|
IEEE 802.1s Multiple Spanning Tree Protocol |
|
|
|
IEEE 802.1p Class of Service, Priority Protocols |
|
|
|
IEEE 802.1Q VLAN Tagging |
|
|
|
IEEE 802.1X Port Authentication |
|
|
|
IEEE 802.3ad LACP Aggregation |
|
|
|
IEEE 802.1AB Link Layer Discovery Protocol |
|
|
|
IEEE 1588v2 Clock Synchronization |
|
|
|
IEEE 802.3af PoE 15.4 Watts |
|
|
|
IEEE 802.3at PoE 30 Watts |
|
|
|
Processing Type |
|
|
|
IEEE 802.3x Flow control in full duplex, back-pressure flow control in half duplex |
|
|
|
Interface |
|
|
|
RJ45 Ports: 8 10/100/1000Base-T, auto MDI/MDI-X, auto negotiation |
|
|
|
SFP Ports: 4 100/1000Base-SFP |
|
|
|
PoE+ Pinout: 1 & 2 DC +, 3 & 6 DC - |
|
|
|
Console Port: RS-232 in RJ45 connector |
|
|
|
Alarm Contacts(DO): 1 relay output, Carry current 1 A@24VDC |
|
|
|
Reset Button: 1set |
|
|
|
Performance and Scalability |
|
|
|
Switching Capacity: 24Gbps, Wired speed, Non-blocking switching fabric |
|
|
|
Forwarding Rate: 35.7Mpps |
|
|
|
MAC Address Table: 8K |
|
|
|
Packet Buffer Memory: 4M bits |
|
|
|
IGMP Multicast Groups: 256 |
|
|
|
Max. VLANs: 4096 |
|
|
|
Quality of Service: 8 priority queues per port |
|
|
|
DHCP Server: 253 IP addresses |
|
|
|
Jumbo Frame: 9,216 Bytes |
|
|
|
Management |
|
|
|
Software: STP/RSTP/MSTP, LACP, QoS, IGMP Snooping v1/v2/v3, IGMP Query v1/v2, VLAN, SSH, DNS, HTTP, HTTPS, RADIUS, TACACS+, SNMP v1/v2c/v3, SNMP Traps, TFTP, RMON, LLDP, DHCP Server/Client, DHCP Relay Option 82, Telnet, Syslog, SMTP, SNTP Client, DOS/DDOS auto prevention, MRP, MODBUS TCP |
|
|
|
Security: MAC/IP/TCP/UDP filtering, HTTPS, SSH, 802.1x, TACACS+, SNMP v3 |
|
|
|
Configuration: Web Browser, Cisco-like Telnet CLI , RJ45 console, SNMP |
|
|
|
MIB: MIB II, Bridge MIB, SNMP MIB, Ether-like MIB, Q-Bridge/P-Bridge MIB, IF MIB, Traceroute MIB, TCP MIB, UDP MIB, IP MIB, RMON Group 1,2,3,9, Delta Private MIB |
|
|
|
Power Requirements |
|
|
|
Input Voltage: 2 sets, 48 to 57 VDC redundant terminal block input |
|
|
|
Input Current: Max. 5.5A(with powered device); Max. 0.26A (without powered device) |
|
|
|
Overload Current Protection: Present, max. input current 10A |
|
|
|
Reverse Polarity Protection: NOT Present |
|
|
|
Physical |
|
|
|
Housing: IP30 metal case |
|
|
|
Dimensions: 154 mm(H) x 96.4 mm(W) x 105.5 mm (D) |
|
|
|
Weight: 1205g |
|
|
|
Installation: DIN-Rail and wall mounting |
|
|
|
Environmental Limits |
|
|
|
Operating Temperature: -40℃ to 70℃(-40℉ to 158℉) |
|
|
|
Storage Temperature: -40℃ to 85℃(-40℉ to 185℉) |
|
|
|
Ambient Relative Humidity: 5% to 95%(non-condensing) |
|
|
|
Approvals |
|
|
|
Safety: EN 60950-1 |
|
|
|
EMI: FCC 47 CFR Part 15 Subpart B Class A, EN 55022(CISPR 22) |
|
|
|
EMS(EN55024): IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11 |
|
|
|
Shock: IEC 60068-2-27 |
|
|
|
Freefall: IEC 60068-2-32 |
|
|
|
Vibration: IEC 60068-2-6 |
|
|
|
Hi-Pot:1.5KV
|
|
|
|
|
|
|